Image 05 · services-hero.jpg

Complicated is a description. Not a requirement.

Eight areas of NYC plumbing compliance. For each one: what’s required, who it applies to, and what we take care of for you.

Local Law 152 Gas Piping Inspections

Periodic inspection of building gas piping, with certification filed with the Department of Buildings.

Schedule an LL152 inspection

What’s required

Local Law 152 of 2016 requires the gas piping systems in most NYC buildings to be inspected at least once every four years. The inspection covers exposed gas piping from the point of entry into the building — including building service meters, public spaces, hallways, corridors, and boiler and mechanical rooms — up to individual tenant spaces.

The inspection must be performed by a NYC Licensed Master Plumber, or a qualified individual working under one. The results are then certified to the Department of Buildings. As of July 27, 2026, certifications are filed through DOB NOW: Safety.

  • Every 4 yearsInspection cycle, scheduled by community district
  • $5,000Civil penalty for failure to file ($1,500 for three-family buildings)
  • R-3 exemptOne- and two-family homes are not covered

When your building is due

The cycle year is set by the community district where the building is located. Each cycle closes on December 31 of the cycle year.

Local Law 152 inspection schedule by community district
Community DistrictsCurrent cycleNext cycle
1, 3, 1020242028
2, 5, 7, 13, 1820252029
4, 6, 8, 9, 162026 Due Dec 312030
11, 12, 14, 15, 1720272031

Not sure which community district your building is in? Send us the address and we’ll confirm the cycle and what’s on file with DOB.

What we take care of

  • Confirming your building’s cycle and filing status
  • Scheduling the inspection
  • Arranging access to meter rooms, boiler rooms and common areas
  • Tracking the inspection report and DOB certification
  • Follow-up when conditions require correction
  • Keeping your next cycle on the calendar

We handle Local Law 152 compliance from start to finish — from scheduling the inspection to the final filing.

Official guidance: NYC Department of Buildings — Gas Piping Inspections

Local Law 157 Natural Gas Detectors

Natural gas alarms in covered residential buildings, required by January 1, 2027.

Ask about gas detectors

What’s required

Local Law 157 of 2016 requires owners of covered residential buildings with gas service to provide natural gas alarms. Alarms must be listed and labeled to UL 1484, the safety standard for residential gas detectors, and installed according to the manufacturer’s instructions.

The original deadline was extended. The Department of Buildings has confirmed that required alarms must be installed on or before January 1, 2027.

  • Jan 1, 2027Installation deadline confirmed by DOB
  • UL 1484Listing standard for residential natural gas alarms
  • No gas, no requirementBuildings without gas piping or service are exempt

Who it applies to

The requirement generally applies to multifamily buildings (Class A and Class B multiple dwellings) and to one- and two-family homes that are not owner-occupied, where the building has gas service.

What we take care of

  • Confirming whether, and where, alarms are required
  • Approved detectors at competitive pricing
  • Installation across units and buildings
  • Organizing records for your compliance files

Source: NYC Department of Buildings service notice, June 2026. Confirm current requirements with DOB.

Backflow Services

Annual testing of backflow prevention devices, with results filed with the Department of Environmental Protection.

Schedule a backflow test

What’s required

Backflow prevention devices keep contaminated water from flowing back into the public water supply. NYC DEP requires them on properties that present a cross-connection hazard. Once installed, a device must be tested at installation and every 12 months after, by a New York State–certified backflow prevention tester, with the test report submitted to DEP.

  • Every 12 monthsRequired testing interval after installation
  • NYS-certifiedTests performed by certified testers; reports signed with a Licensed Master Plumber
  • Fines or shutoffPossible consequences of missing the annual test

Who it applies to

Properties DEP identifies as a hazard to the water supply — commonly buildings with treated-water boilers, roof tanks, commercial kitchens, irrigation systems or pools, and many commercial, industrial and healthcare uses.

What we take care of

  • Scheduling annual tests
  • Tracking report submission to DEP
  • Repair or replacement when a device fails
  • Responding to DEP notices and violations
  • New installations, from design through sign-off
  • Annual reminders before each test is due

Official guidance: NYC DEP — Backflow Prevention Devices

Annual Boiler Inspections

Annual inspection and DOB reporting for covered boilers.

Schedule a boiler inspection

What’s required

The Department of Buildings requires covered boilers to be inspected every calendar year, with the inspection report filed through DOB NOW: Safety. Defects found during inspection must be corrected and the correction documented.

  • Every yearInspection and filing for each covered boiler
  • $50 / monthLate-filing penalty per boiler, up to $600
  • $1,000Failure-to-file penalty per boiler

Who it applies to

Generally, boilers in residential buildings with six or more units and in most commercial buildings. Small low-pressure boilers and boilers serving a single residential unit are typically exempt. We’ll confirm what applies to your equipment.

What we take care of

  • Scheduling the annual inspection
  • Access with your building staff
  • Tracking report filing with DOB
  • Correction of identified defects
  • Calendar tracking across multiple boilers and buildings

Official guidance: NYC Department of Buildings — Boiler Compliance

Water Meters

Water meter requirements, installation and service.

Ask about water meters

What’s involved

NYC DEP meters water use at properties across the city. Meter-related work — new installations, replacements, relocations and repairs — typically requires coordination with DEP and a NYC Licensed Master Plumber, along with the applications and correspondence that go with it.

What we take care of

  • Reviewing what your request requires
  • Meter installation, replacement and repair
  • Organizing applications and DEP correspondence
  • Scheduling and site access

LAA Applications

Limited Alteration Applications for qualifying plumbing work.

Ask about an LAA

What’s involved

Certain minor plumbing work — repairs, replacements and small alterations — can be filed with the Department of Buildings as a Limited Alteration Application rather than a full alteration job. LAAs are filed in DOB NOW: Build by a NYC Licensed Master Plumber, and may require inspection and sign-off when the work is complete.

What we take care of

  • Confirming whether the work qualifies for an LAA
  • Getting the application filed in DOB NOW
  • Tracking approvals, inspections and sign-off
  • Keeping the documentation organized for your records

OP-49 Filings

Notifications for boiler removal and permanent disconnection.

Ask about an OP-49

What’s involved

When a boiler is removed or permanently disconnected, the Department of Buildings must be notified so its records reflect the change. The notification, historically form OP-49, is now filed as a Boiler Removal Notification in DOB NOW: Build, completed by a licensed professional — generally within 30 days.

Skip it, and a boiler that no longer exists can keep generating inspection requirements, and penalties.

What we take care of

  • Reviewing the boiler records on file with DOB
  • Getting the notification filed
  • Tracking acceptance of the notification
  • Updating your compliance records

Official guidance: NYC Department of Buildings — Boiler Compliance

DEP CATS Filings

Filing and renewal of DEP boiler registrations and air permits through CATS.

Ask about a CATS filing

What’s involved

The NYC Department of Environmental Protection tracks boilers and other fuel-burning equipment through its Clean Air Tracking System (CATS), where registrations, air permits and renewals are filed. Boilers from 350,000 BTU per hour up to 4.2 million BTU per hour need a DEP boiler registration. At 4.2 million BTU per hour and above, a work permit — filed by a Professional Engineer or Registered Architect — and a certificate of operation are required.

Registrations and certificates run on a three-year cycle, so they have to be renewed on time. A DOB boiler inspection is a separate requirement — it doesn’t renew your DEP registration.

What we take care of

  • Checking which boilers need a registration or permit
  • Filing new registrations and renewals in CATS
  • Coordinating work permits and certificates of operation with a licensed engineer or architect
  • Tracking expiration dates so renewals are filed on time

Official guidance: NYC Department of Environmental Protection — Clean Air Tracking System

Requirements, schedules and penalties on this page are summarized from NYC Department of Buildings and Department of Environmental Protection guidance as of November 2026. Regulations change, and individual buildings vary. This page is general information, not legal advice — contact us to confirm what applies to your property.

Less on your desk. More under control.

Tell us about your buildings once. We’ll track what’s due and schedule what’s needed.

718.865.3779
Image 02 · hero-gas-alarm.jpg

Local Law 157

Natural gas alarms are due January 1, 2027.

Covered residential buildings with gas service must have approved natural gas alarms installed by the deadline. Mainstream offers approved detectors at competitive pricing and can arrange installation.